This Nitronic 50 Round Bar provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless steel has corrosion resistance greater than that provided by Types 316, 316L, 317 and 317L, plus approximately twice the yield strength at room temperatures.
ARMCO NITRONIC 50 does not become magnetic when cold (-320 – 1200 °F), according to Section VIII of the ASME Boiler and worked or cooled to sub-zero temperatures. High …
Premium Alloys stocks Nitronic 50. Nitronic 50 is an austenitic premium stainless grade that provides better corrosion resistance than 300 or 400 series stainless. Depending on the manufacturing process, Nitronic 50 has the capability to increase over double its yield and tensile strength. In the high strength condition, Nitronic 50 can withstand high …
Nitronic 50 (XM-19/UNS S20910/1.3964) Nitronic 50 (XM-19/UNS S20910/1.3964) is a high strength and good corrosion resistant austenitic stainless steel. It has nearly double the yield strength of 304 and 316 stainless steel and has better corrosion resistance than 317L stainless steel. It remains non-magnetic even after being severely cold worked.
Nitronic™ 50 stainless steel is an austenitic grade providing corrosion resistance greater than other typical austenitic grades such as SS 316/316L and 317/317L. It is also capable of nearly double the yield strength of similar austenitic grades. Nitronic™ 50 (XM-19) stainless steel offers yield strength three times that of 316.
Choose from our selection of Nitronic 50 stainless steel in a wide range of styles and sizes. In stock and ready to ship.
NITRONIC 50; NITRONIC 60; Nickel; 200; 400; 600; 625; 718; 925; HX; K500; R405; X750; Titanium; 3AL-2.5V; 6AL-2SN-4ZR-2MO; Cast Iron; 65-45-12; 80-55-06; G2; NI-RESIST; …
Outstanding corrosion resistance gives Armco's NITRONIC 50 Stainless Steel the leading edge for applications where Types 316. 316L, 317 and 317L are only marginal. It's an effective alloy for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries.
Nitronic 50 is austenitic non-magnetic stainless steel with the addition of nitrogen, manganese and molybdenum, characterised by high mechanical properties (f.ex. resistance characteristics) and a very good corrosion resistance. The grade exhibits comparable resistance to corrosion as basic austenitic grades, high yield point, resistance and
Common Trade Names: N50 Stainless, Nitronic 50, XM-19. High strength and good corrosion resistance. Nearly 2X strength of 304 & 316 with better corrosion resistance …
Premium Alloys offers Nitronic 50 in two different conditions – annealed and high strength. Nitronic 50 is annealed between 1950 deg F and 2050 deg F.
Nitronic 50 Round Bar. ₹ 4,925/ Kg Get Latest Price. Brand: HEUBACH. Shape: ROUND, SQUARE, HEXAGON. Usage/Application: - Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty. Grade: Nitronic 50 Round Bar. Single Piece Length: 3 MTRS TO 6 MTRS. Size: 2 MM TO 650 MM. read more...
Nitronic 50 High Strength Tubing (XM-19) is a non-magnetic austenitic Stainless with good corrosion resistance and high strength for MWD/LWD tool applications. Material is produced by flow-forming which is a metal forming process for manufacturing seamless, cold-worked tubulars. This process increases the properties beyond standard Nitronic …
In addition, Armco Nitronic 50® Stainless has very good mechanical properties at both elevated and sub-zero temperatures. And, unlike many austenitic stainless steels, the alloy does not become magnetic when cold worked. Chemistry Typical. Carbon: 0.06 max Manganese: 4.00-6.00 Silicon: 1.00 max Chromium: 20.5-23.50 Nickel: 11.5-13.50
Nitronic 50 High Strength (XM-19). Austenitic Stainless Steel with high strength and corrosion resistance, better corrosion resistance than 316. For inquires and technical info call us today at + 1 800-704-6866
0.10- 0.30. Nitronic 50®, also known as Alloy 50®, is a nitrogen-strengthened stainless steel. It exhibits the highest corrosion resistance of any stainless steel grade, and offers an excellent combination of strength, ductility, and toughness, even at cryonic temperatures. Nitronic 50® is commonly used in applications ranging from fasteners
Features. Good Corrosion Resistance. High strength Austenitic Alloy. Nitronic 50 or XM-19 is technically an austenitic stainless steel with superior corrosion resistance to that of 316 and 317 with almost twice the yield strength at room temperature. At both higher and lower temps this alloy possesses good mechanical properties.
Stainless Steel N50, also called "Nitronic 50", has exceptional wear, galling resistance, and corrosion resistance superior to 316 stainless. Designed as an all-purpose steel, it is a …
UNS S20910/XM-19 stainless steel provides outstanding resistance to general corrosion and is superior in this respect to Types 316/316L and 317/317L in many media. The 1950°F (1066°C) annealed condition provides adequate corrosion resistance for many applications combined with a high strength level. Where the material is to be employed in the
Nitronic 50 HS Tubing Technical Data. UTS (KSI): 180 Min; Yield 0.2% Offset (KSI): 160 Min; EL (% Min): 8%; RA (% Min): 20%; Hardness (HRC): 43 HRC MAX; Charpy Impact: …
Nitronic fasteners are available in two alloy variations, Nitronic 50 and Nitronic 60, each offering different niche capabilities. Nitronic 50: Corrosion Resistance & Strength Nitronic 50 (1.3964; also known as N-50 and XM-19) fasteners offers reasonable corrosion resistance and a good combination of strength, ductility, and toughness, across a
Best Stainless supplies high-quality Nitronic™ 50 high-strength stainless steel. Nitronic™ 50 stainless steel is an austenitic grade providing corrosion resistance greater than other …
NITRONIC 50 is an austenitic stainless steel with an outstanding combination of strength, toughness and corrosion resistance. It can be supplied in the annealed condition, with yield strength over 50% higher than grades 316 and 316L, with better corrosion resistance. It is also available as NITRONIC 50HS with high strength, attained by special
Corrosion Properties. NITRONIC50/XM-19 Stainless Steel provides outstanding corrosion resistance – superior to Types sus316, sus316L, sus317 and sus317L in many media. For many applications the 1950 F (1066 C) annealed condition provides adequate corrosion resistance and a higher strength level. In very corrosive media or where material is to
Outstanding corrosion resistance gives Armco's NITRONIC 50 Stainless Steel the leading edge for applications where Types 316. 316L, 317 and 317L are only marginal. It's an …
Outstanding corrosion resistance gives Armco's NITRONIC 50 Stainless Steel the leading edge for applications where Types 316. 316L, 317 and 317L are only marginal. It's an effective alloy for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries.
ARMCO NITRONIC 50 does not become magnetic when cold (-320 – 1200 °F), according to Section VIII of the ASME Boiler and worked or cooled to sub-zero temperatures. High-Strength (HS) ARMCO NITRONIC 50 Stainless Steel has a yield strength about three to four times that of Type 316 stainless steel. Composition (wt %) Carbon (C) 0.06 max.
Nitronic 50 (XM-19) is an austenitic stainless steel. Nitronic 50 (XM-19) stainless steel provides a combination of corrosion resistance and strength that are not available in any commercial material in the price range. The corrosion resistance of Nitronic 50 (XM-19) is higher than the corrosion resistance provided by the 316 and 316L Types and
Common Trade Names: N50 Stainless, Nitronic 50, XM-19. High strength and good corrosion resistance. Nearly 2X strength of 304 & 316 with better corrosion resistance than 317L. Available Product Forms: Pipe, tube, fitting, flange, sheet, strip, plate, round bar, flat bar, fastener, forging stock, hexagon and wire